Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Administration Manual

Page: 96 / 861

96 Maintaining your security gateway
Understanding and using licenses
3
When prompted to confirm the removal, click Yes .
All licenses are removed.
A message tells you that the security gateway will be rebooted in 30 seconds and asks if you want to
reboot immediately
4 If you do not want to wait for the reboot to start, click OK .
The Symantec Gateway Security 5000 Series v3.0 logon dialog box displays and the security
gateway reboots.
5 When the reboot has completed, you can log on to the SGMI again.
Related information
For further information related to this topic, see the following:
■
“Installing licenses” on page 94
Enabling and disabling security gateway features
When you first configure the security gateway, the 30-day grace period license gives you access to all
of the security gateway’s features. When the grace period ends, features for which you have not
installed a license are disabled. Installing a license automatically enables the features provided by the
license.
Other features, such as hardware encryption and the ability to make SSH connections, do not require
licenses, but must be enabled through the SGMI in order to take effect.
There are two ways to enable and disable the security gateway’s features:
■
Running the System Setup Wizard
See
“Enabling and disabling security gateway features from the System Setup Wizard” on page 96.
■
By using the System > Configuration > Features tab.
See
“Enabling and disabling security gateway features from the Features window” on page 97.
Enabling and disabling security gateway features from the System Setup
Wizard
With the exception of hardware encryption, the security gateway features you can enable from the
System Setup Wizard are those that are available to you through your security gateway licenses.
The exception is when you first receive your security gateway. At that time, the 30 day evaluation
license that installs with the product lets you use all of the security gateway features until you have
had time to obtain and install your licenses.
Prerequisites
None.
To enable licensed security gateway features from the System Setup Wizard
1
In the SGMI, on the Tools menu, click System Setup Wizard .
2 On the System Setup Wizard Welcome panel, click Next .
3 On the Optional Features panel, check a feature’s check box to enable the feature.
4 When you have enabled all features, click Next .
5
On the Setup Options panel, click Next .
6 On the Machine Settings panel, click Next .
7
On the Network Interfaces panel, click Next .
8 On the Confirmation panel, click Finish .