Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Administration Manual

Page: 97 / 861

97 Maintaining your security gateway
Understanding and using licenses
Related information
For further information related to this topic, see the following:
■
Enabling and disabling security gateway features from the Features window
Enabling and disabling security gateway features from the Features window
The Features window lets you enable both licensed features and other security gateway features such
as the use of an uninterruptible power supply, Clientless VPN features, and the use of SSH.
When you disable a feature, the areas of the SGMI that let you configure that feature are greyed out.
This includes the configuration options for the feature, and other places in the SGMI where those
options are used. For example, if you disable the content filtering feature, you cannot configure
content profiles, or specify URLs that should be blocked. In addition, you cannot add content filtering
restrictions to a rule.
Prerequisites
Complete the following tasks before you begin this procedure:
■
“Obtaining licenses” on page 89
■
“Installing licenses” on page 94
To enable and disable security gateway features
1 In the SGMI, in the left pane, under System, click Configuration .
2 In the right pane, on the Features tab, do the following:
■
To enable a feature, check the check box.
■
To disable a feature, uncheck the check box.
If you are not licensed to use a feature, it is unavailable.
3 Optionally, do one of the following:
■
To save your configuration now and activate later, on the toolbar, click Save .
■
To activate your configuration now, on the toolbar, click Activate .
When prompted to save your changes, click Yes .