Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Administration Manual

Page: 387 / 861

386 Providing remote access using VPN tunnels
Configuring tunnels
4
Click Next .
5 In the Local Security Gateway panel, to specify the local security gateway, do one of the following:
■
To use an existing network entity, click Use existing network entity .
■
To create a new network entity, click Create new network entity .
If you are using an existing security gateway network entity, select it from the drop-down list.
If you are creating a new security gateway network entity, do the following:
■
In the Name text box, type the name of the new security gateway network entity.
The name cannot contain any spaces.
■
In the Address type drop-down list, to use a logical network interface, select Interface or, to
use a virtual IP address, select VIP.
■
In the IP address drop-down list, select either a logical network interface or a VIP address,
depending on what was selected above.
6 Click Next .