Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Administration Manual

Page: 619 / 861

618 Field descriptions
Policy field descriptions
VPN Profile Properties—General tab
You can select from either an address pool or a DHCP interface for the clientless connection. The
necessary routes for the connection are also defined here.
Associated tasks
The task that you can perform with this tab is:
■
“Defining VPN profiles to allow communication between the security gateway and clientless
users”
on page 413
Table D-52
VPN Profile Properties—General tab
Field Description
Profile name A unique name for the VPN profile.
The maximum length is 256 characters.
Allowed characters are a-z, A-Z, 0-9, periods (.), dashes (-), and underscores (_).
Do not include spaces in the name. The characters @, !, #, $, %,
^
, &, *, <, >, and other
reserved characters are also invalid.
IDS/IPS policy Intrusion detection or intrusion prevention policy to apply to Clientless VPN traffic.
Apply firewall rules Enables all security gateway scanning of Clientless VPN traffic.
This option passes tunnel traffic to the security gateway proxies. This option is unchecked
by default.
DHCP Enables DHCP connections.
This option is checked by default.
DHCP server
location If DHCP is enabled, select an existing security gateway interface from the drop-down list.
Address pool Uses a pool of available addresses.
Note: If a remote user’s computer is already assigned an address within the specified range,
the user will not be able to establish a VPN connection.
This option is unchecked by default.
Starting IP First IP address in the available range.
Ending IP Last IP address in the available range.
Netmask Netmask for the IP address range.
Primary DNS server IP address of the primary DNS server.
Secondary DNS
server IP address of the secondary DNS server.
DNS suffix DNS suffix to append to resolve a name that may not be fully qualified.
WINS server IP address of the WINS server.
Route Table Lists the IP addresses and netmasks configured for the clientless VPN profile.
To add routes to the route table, click Add, type an IP address and netmask in the Network
and Netmask text boxes, and then click Apply. When you are finished adding routes, click
OK.