Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Administration Manual

Page: 111 / 861

111 Maintaining your security gateway
Making system changes with the System Setup Wizard
8
Click OK .
9 On the Machine Settings panel, under Specify the system information, do the following:
10 To provide additional security against personnel who should not have access privileges, check Lock
LCD panel .
You can unlock the LCD panel from the appliance by using your root password. The LCD panel
relocks again after 60 seconds of inactivity.
For instructions on how to permanently unlock the LCD panel, see the
Symantec Gateway Security
5000 Series v3.0 Installation Guide .
11 To change the administrator password, do the following:
12
Click Next .
13 On the Network Interfaces panel, click Next .
14 On the Optional Security Gateway Configuration panel, click Next .
15 In the Confirmation panel, review the summary of your configuration.
16 Click Finish .
If you locked the LCD panel or changed the default gateway, a message tells you that the security
gateway will be rebooted in 30 seconds and asks if you want to reboot immediately
17 If you do not want to wait for the reboot to start, click OK .
The Symantec Gateway Security 5000 Series v3.0 logon dialog box displays and the security
gateway reboots.
When the reboot has completed, you can log on to the SGMI again.
Related information
For further information related to this topic, see the following:
■
“Changing administrator passwords” on page 71
Host name Type the host name of the security gateway.
Domain name Type the domain name of the security gateway.
Default gateway Type the IP address of the default gateway.
In most cases, the default gateway is the router or connection you have to your ISP.
Change administrator password To enable changing the administrator password, check this option.
Current password Type the current administrator password.
New password Type a new administrator password.
The admin password should be at least 10 characters long and should not
contain digits, uppercase letters, or punctuation marks.
You can still change the password if you do not meet these conditions, but
you will receive a warning message.
The password is encrypted and appears as a string of asterisk (*) characters.
Verify password Retype the new password to verify the change.