Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Administration Manual

Page: 226 / 861

226 Defining your security environment
Controlling full application inspection of traffic
3
In the Proxy Properties dialog box, on the General tab, to enable the RTSP proxy, click Enable .
4 In the Caption text box, type a brief description of the RTSP proxy.
5 Optionally, on the Description tab, type a more detailed description than you typed in the Caption
text box.
6 Click OK .
To create an RTSP service group
1
In the SGMI, in the left pane, under Assets, click Protocols .
2 In the right pane, on the Service Groups tab, click New .
3 In the Service Group Properties dialog box, on the General tab, in the Service Group name text box,
type a name for this service group.
4 On the Protocols tab, to display a list of available protocols to add to this service group, click Add .
5 In the Select protocols dialog box, click rtsp .
6 Click OK .
7
Optionally, on the Description tab, type a more detailed description than you typed in the Caption
text box.
8 In the Service Group Properties dialog box, click OK .
To create an allow rule for RTSP
1 In the SGMI, in the left pane, under Policy, click Firewall .
2 In the right pane, on the Rules tab, click New .
3
In the Rule Properties dialog box, on the General tab, do the following:
4 Optionally, on the Description tab, type a more detailed description than you typed in the Caption
text box.
5
Click OK .
6 Optionally, do one of the following:
■
To save your configuration now and activate later, on the toolbar, click Save .
■
To activate your configuration now, on the toolbar, click Activate .
When prompted to save your changes, click Yes .
Rule name Type a name for this rule.
Caption Type a brief description of the rule.
Action From the action drop-down list, select Allow .
Arriving through Select the connection point through which traffic enters the security gateway.
Source Select the defined network entity from which RTSP traffic originates.
This can be a host network entity representing a specific machine from which the
packets originate, or subnet network entity representing a range of hosts.
Destination Select the defined network entity to which RTSP traffic is destined.
This can be a host network entity representing a specific machine or a subnet network
entity representing a range of hosts.
Leaving through Select the connection point through which traffic leaves the security gateway.
Service group Select the service group containing the rtsp protocol.