Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Administration Manual

Page: 82 / 861

82 Maintaining your security gateway
Configuring and running LiveUpdate
6
To select the type of interval, do one of the following:
7 Optionally, on the Description tab, type a more detailed description than you typed in the Caption
text box.
8 Click OK .
9 Optionally, do one of the following:
■
To save your configuration now and activate later, on the toolbar, click Save .
■
To activate your configuration now, on the toolbar, click Activate .
When prompted to save your changes, click Yes .
Related information
For further information related to this topic, see the following:
■
“LiveUpdate Settings for Component Properties—General tab” on page 755
■
“Adding a LiveUpdate server for a component” on page 82
■
“Specifying an HTTP proxy for LiveUpdate” on page 83
■
“Running LiveUpdate manually” on page 84
Adding a LiveUpdate server for a component
Three LiveUpdate servers are provided by Symantec. By default, these are selected as the LiveUpdate
servers for the content security components.
You can also configure one or more additional servers for use for LiveUpdate and specify them in the
components’ properties.
A total of 10 servers can be listed for each component. When LiveUpdate is performed, these servers
are contacted in the order in which they are listed. You can modify the order.
Prerequisites
None.
To add a LiveUpdate server for a component
1 In the SGMI, in the left pane, under System, click Configuration .
2 In the right pane, on the LiveUpdate tab, view the components that can be updated and the
LiveUpdate servers that are defined for your security gateway.
3 In the LiveUpdate Settings for Component Properties dialog box, the General tab lists the
LiveUpdate servers that are currently used to update the component.
To add a server, beside the LiveUpdate servers list, click
Add .
Multiple times a day Use the drop-down list to specify the interval in hours.
Once a day Use the Time drop-down lists to specify the hour and minute.
Click the appropriate radio button to specify AM or PM.
Once a week Use the Day drop-down list to specify the day of the week.
Use the Time drop-down lists to specify the hour and minute.
Click the appropriate radio button to specify AM or PM.