Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Administration Manual

Page: 83 / 861

83 Maintaining your security gateway
Configuring and running LiveUpdate
4
In the Select LiveUpdate Servers dialog box, select a server from the LiveUpdate Server list, and
then do one of the following:
■
To add the server to the LiveUpdate Servers list without closing the Select dialog box, click
Apply .
■
To add the server to the LiveUpdate Servers list and close the Select dialog box, click OK .
You can add up to 10 LiveUpdate servers.
5
LiveUpdate servers are contacted in the order in which they are listed.
To move a server in the list, select it, and then click
Move Up or Move Down .
6
Click OK .
7 Optionally, do one of the following:
■
To save your configuration now and activate later, on the toolbar, click Save .
■
To activate your configuration now, on the toolbar, click Activate .
When prompted to save your changes, click Yes .
Related information
For further information related to this topic, see the following:
■
“LiveUpdate Settings for Component Properties—General tab” on page 755
■
“Defining a LiveUpdate server” on page 79
Specifying an HTTP proxy for LiveUpdate
If one or more of your LiveUpdate servers uses HTTP to download updated definitions or signatures,
you can specify a proxy as one of the component properties.
Using a proxy lets you specify a different port, and a user name and password for greater security.
Prerequisites
None.
To specify an HTTP proxy for LiveUpdate
1 In the SGMI, in the left pane, under System, click Configuration .
2 In the right pane, on the LiveUpdate tab, double-click the component for which you want to use a
proxy.
3 On the Proxy tab, check Use a proxy for HTTP connections .
4
Specify the proxy details by doing the following:
5 Click OK .
6
Optionally, do one of the following:
■
To save your configuration now and activate later, on the toolbar, click Save .
■
To activate your configuration now, on the toolbar, click Activate .
When prompted to save your changes, click Yes .
HTTP proxy address Specify the address of the proxy server.
HTTP proxy port Specify the port used by the proxy server to connect to the security gateway.
HTTP proxy user name Specify the user name used to authenticate the connection.
HTTP proxy password Specify the password used to authenticate the connection.