Installation and Reference Manual
System Operation
Installation and Reference Manual v3.2/0410/6
65
If the “Searching for Server” message remains and the PCS 60 does not continue to the next step
check that the PC can communicate with the Call Server or refer to the Connect to the Call Server
Remotely section below.
4
The “No Licenses Available” message will be displayed while the phone is registered as described
in step 5.
5
If the Auto Add Phones feature is turned on the Call Server will automatically register the PCS 60.
(Please refer to page 34 for further details.)
If the Auto Add Phones feature is turned off:
a
In Manager select Unassigned Phones
b
The hardware address of the PC will identify the PCS 60 to be connected. Click on the entry
required. (If the PCS 60 is not listed check the installation of the IPUser licence as detailed
from page 35.)
c
From the Status list box select Member
d
Select Update when ready
e
The PCS 60 will now appear under Phones, identified by the hardware address of the PC
6
The “Security Access Denial” message will be displayed while an IPUser licence is assigned
7
A User account will be automatically created configured with the next available extension number.
This User will be assigned to the PCS 60, the “Security Access Denial” message will disappear and
the PCS 60 will be ready for use. The name of the assigned User will be displayed in the Status Bar
at the bottom left hand corner of the PCS 60.
The User’s Initial Phone field displays the PCS 60 that the User is assigned to, identified by the
hardware address of the PC.
