manualshive.com logo in svg

Splicecom Maximiser, Installation And Reference Manual

The Splicecom Maximiser User Manual is a comprehensive guide that enables users to fully utilize the product's features. Easily accessible, it is available for free download from our website, offering a step-by-step manual to help you optimize the Splicecom Maximiser's capabilities.

Share
Download
background image

Installation and Reference Manual

 

 

 

Field Descriptions 
Installation and Reference Manual v3.2/0410/6 

 

307 

 

Extended Attendant 
Enable/disables the ability by this voicemail port to support Extended Attendant.  Must be enabled when 
using VXML Scripts. 
 
Enhanced Speech Services Capacity 
Defines the maximum number of Enhanced Speech Processing (ESP) calls allowed into this Voicemail 
Port.  The same number of ESPSession licences must be installed before configuring this field. 
 
Internal Collect Number 
Number to be included in SMS message to allow access to voicemail internally. 
 
External Collect Number 
Number to be included in SMS message to allow access to voicemail externally. 
 
Text to Speech Voice 
Enter either 

David

 or 

Millie

 to determine the voice to be used with VXML and Text-to-Speech.  If left blank 

will use David. 
 
Require Mailbox Access Code 
Enable/Disabled.  If enabled all Users will be prompted to enter their Voicemail Access Code when 
accessing their voicemail via a dial plan entry using the Voicemail Retrieve action. 
 

Debug page 

SMTP / IMAP / Concurrency / IMAP Poll / VXML Data 
Enables tracing via Telnet in the voicemail.log 

Music Channels 

Name 
64 characters.  This field will indicate when the Music Channel will be used.  If this Music Channel is to be 
active when a Department call is on hold enter the Department name.  If the Music Channel is to be 
active when a specific User places a call on hold enter the User Name.  If the Music Channel is to be 
active when calls to a specific Company are placed on hold enter the Company Name.  If the Music 
Channel is to be active for all calls placed on hold (unless a specific User or Department or Company 
Music Channel exists) enter DefaultHoldMusic. 
 
Playlist 
64 characters.  If the message/music is to be stored internally enter the name of the WAV file, stored in 
the Admin area of the Call Server, to be played.  If this field is left blank the default WAV file will be played 
(“Please hold”).  Alternatively, if the music/message is being played from an external source enter any 
text that does not match the name of a WAV file stored on the Call Server. 
 
Multicast Address 
18 characters.  The Multicast address of the Call Server, eg 224.0.1.51 
 
Multicast Port 
128 characters.  The address of the Multicast Port for the Music Channel.  Where the music is being stored 
internally this must be an even number not already in use (not less than 1024).  Where the music is being 
sourced externally the number entered must be equal to 16640 + (2 x port number). 

Summary of Contents for Maximiser













































































































































































































































































































































































Reviews:

No comments

Related manuals for Maximiser

NEC SL1100 Feature Manual preview
SL1100
Brand: NEC Pages: 288
NEC SL1100 Networking Manual preview
SL1100
Brand: NEC Pages: 292
Panasonic KX-TD816 Programming Manual preview
KX-TD816
Brand: Panasonic Pages: 443
Panasonic KX-TC1484 Operating Instructions preview
KX-TC1484
Brand: Panasonic Pages: 2
Panasonic KX-TGP500B04 Administrator'S Manual preview
KX-TGP500B04
Brand: Panasonic Pages: 256
Panasonic KX-T7710 Quick Start Manual preview
KX-T7710
Brand: Panasonic Pages: 2
Panasonic KX-TD816E Installation Manual preview
KX-TD816E
Brand: Panasonic Pages: 600
Panasonic ICX Quick Reference preview
ICX
Brand: Panasonic Pages: 4
Panasonic ICX Technical Manual preview
ICX
Brand: Panasonic Pages: 30
Panasonic EASA-PHONE KX-T61610 Programmable Executive Override preview
EASA-PHONE KX-T61610
Brand: Panasonic Pages: 4
Panasonic EASA-PHONE KX-T30850 User Manual preview
EASA-PHONE KX-T30850
Brand: Panasonic Pages: 6
Panasonic KX-TG7733S Operating Instructions Manual preview
KX-TG7733S
Brand: Panasonic Pages: 88
Fanvil X3 User Tips preview
X3
Brand: Fanvil Pages: 16
Xblue Networks SP2014 Manual preview
SP2014
Brand: Xblue Networks Pages: 60
Xblue Networks X16 Quick Start Manual preview
X16
Brand: Xblue Networks Pages: 2
Xblue Networks X-50 Installation Manual preview
X-50
Brand: Xblue Networks Pages: 260
Xblue Networks X16 Manual preview
X16
Brand: Xblue Networks Pages: 2
Unifone Small Office Installation And Programming Manual preview
Small Office
Brand: Unifone Pages: 96

Brands by name

Popular brands

Load more brands