Installation and Reference Manual
Configuring PBX functionality
170
Installation and Reference Manual v3.2/0410/6
Alternatively, amend the default Standard DDI Plan..
Creating a DDI Plan entry
1
Select the Add DDI Entry button
2
If this entry is only to be active during certain
hours select the Time Plan field and select the
Time Plan required
3
In the Number Match field enter the DDI Number
required. The number entered must be the
number presented by the exchange (typically last
6 digits) as an exact match is made. This field is
also relevant to outgoing CLI for the User as
explained below
4
From the Bearer Capability list box select the option required eg Voice for connection to a User or
Department
5
In the Translate To field enter the extension number or name of the User or Department to which
calls to this DDI number are to be routed.
6
Select Update
7
Repeat steps 5 to 10 to add further entries
8
Select Update or Apply when ready.
It is recommended that a default entry be created in which the Number Match field is left blank, as
shown by the first entry in the diagram above. This example will route all incoming calls to the Main
Department unless a specific entry exists.
If a Time Plan is used the call will be routed during the hours specified by the Time Plan. Outside of those
hours the system will look for the next match in the list or use the default entry.
