manualshive.com logo in svg

Splicecom Maximiser, Installation And Reference Manual

The Splicecom Maximiser User Manual is a comprehensive guide that enables users to fully utilize the product's features. Easily accessible, it is available for free download from our website, offering a step-by-step manual to help you optimize the Splicecom Maximiser's capabilities.

Share
Download
background image

Installation and Reference Manual

 

 

 

Maintenance & Troubleshooting 
Installation and Reference Manual v3.2/0410/6 

 

267 

 

 
cd /logs 
ls –l 
cat upgrade.log 
 

Upgrading the PCS 60 software 

New PCS 60 software will be supplied in a compressed folder called, for example, PCS60.3.2.31.msi.zip or 
PCS60_MAC.3.2.67.pkg.zip.  Before installing the new software uninstall the current version of PCS 60 
running on the PC.  It is not necessary to remove any short cuts or aliases created as these can be used 
with the new software as long as it is installed into the same location.   The installation of the new 
software will be the same as a new install as described in the PCS 60 section from page 58 except that if 
the PCS 60 is running as an IP Phone a User will already be assigned to this PC and any Preferences 
settings will have been saved.  If the PCS 60 is running as a partner again any Preferences settings will be 
saved and can be used with the new software. 
 

Upgrading the PCS 50 software 

New PCS 50 software will be supplied as a file such as PCS50.2.2.652.setup.exe or PCS50.2.2.667.pkg.zip.  
The installation of the new software will be the same as a new install as described in the PCS 50 section 
from page 69.  It is not necessary to remove the existing software before installation.  If the PCS 50 is 
running as an IP Phone a User will already be assigned to this PC and any Preferences settings will have 
been saved.  If the PCS 50 is running as a partner again any Preferences settings will be saved and can be 
used with the new software. 

Initial Configuration Boot Menu 

Each PCS 580, 570, 560, 410 and 100 has a boot menu that allows you to take the configuration of the 
handset back to default and/or upgrade the handset.  The PCS 400 also has this facility however a menu 
of options is not given and the upgrade and default of the configuration is automatic.   
 
The boot menu can be accessed as follows: 
 
PCS 580 – lift the handset, press the screen while rebooting the handset 
PCS 570/560 – lift the handset, press the Speaker button while rebooting the handset 
PCS 410 – lift the handset, press the screen while rebooting the handset 
PCS 100 – press the Speaker button while rebooting handset 
 
The boot menu will be displayed giving you the following options: 
 

PCS 580 

“

Release screen for boot options

” = let go of the screen to view the following options. 

 
“

Press screen before the countdown completes to erase the code

” = either, 

•

 

press the screen to erase any configuration settings such as a static IP address and return the handset 
to the default configuration whereby the unit will obtain its IP set up via DHCP, or  

•

 

wait for the countdown to complete to view the next option. 

 

Summary of Contents for Maximiser













































































































































































































































































































































































Reviews:

No comments

Related manuals for Maximiser

Aastra Telephone Quick Reference Manual preview
Telephone
Brand: Aastra Pages: 2
Aastra POWERTOUCH 390 Specifications preview
POWERTOUCH 390
Brand: Aastra Pages: 2
Aastra Meridian 9216 Specifications preview
Meridian 9216
Brand: Aastra Pages: 2
Aastra Meridian 9116 Specifications preview
Meridian 9116
Brand: Aastra Pages: 2
Aastra Dialog 4106 Basic Quick Reference Manual preview
Dialog 4106 Basic
Brand: Aastra Pages: 2
EastLink Telephone Customer Manual preview
Telephone
Brand: EastLink Pages: 28
Aastra 9617 Online User'S Manual preview
9617
Brand: Aastra Pages: 461
Aastra 9120 User Manual preview
9120
Brand: Aastra Pages: 40
Aastra SIP-DECT Installation, Administration And Maintenance Manual preview
SIP-DECT
Brand: Aastra Pages: 47
Aastra SIP-DECT Installation And Administration Manual preview
SIP-DECT
Brand: Aastra Pages: 47
Jabra TOUR Datasheet preview
TOUR
Brand: Jabra Pages: 2
Jabra JX20 - Pura - Headset Brochure preview
JX20 - Pura - Headset
Brand: Jabra Pages: 4
Polycom SpectraLink 8002 Series Quick Reference Manual preview
SpectraLink 8002 Series
Brand: Polycom Pages: 72
Sprint 1930c Owner'S Manual preview
1930c
Brand: Sprint Pages: 44
Jabra CRUISER2 HSF002 Datasheet preview
CRUISER2 HSF002
Brand: Jabra Pages: 2
switel BDT 717 Operating Instructions Manual preview
BDT 717
Brand: switel Pages: 116
Radio Shack ET-536 Owner'S Manual preview
ET-536
Brand: Radio Shack Pages: 24
Radio Shack 43-325 User Manual preview
43-325
Brand: Radio Shack Pages: 25

Brands by name

Popular brands

Load more brands