The following operating modes can be shown here:
● On (see the APL online help)
● Out of service (see APL Online Help)
With totalizer:
The block can be operated using the following modes:
● Local mode
● Automatic mode
● Manual mode
● Out of service
(7) Display and change the totalizer command
PV4
: Hold and Totalize
This area shows you the current operating state for the totalizer
PV4
. The following states can
be shown and executed here:
● "Hold"
● "Totalize"
If a totalizer is not configured, the area is switched to invisible.
(8) Reset totalizer
PV4
Reset the totalizer value to zero here.
(9) Display of process value (
PV4
) including signal status
This area indicates the current process value (
PV4
) with the associated signal status. The name
of the configured measured value is displayed depending on the
PV_Meas4
variable, in this
case Totalizer3 : Corrected Volume Flow.
(10) Change to third standard view
The third part of the two-part standard view of the faceplate can be selected here.
SITRANS FC430 PA
13.1 SiFC43PA
SITRANS Library for PCS 7
606
Function Manual, 05/2019, A5E35351976-11
Summary of Contents for SITRANS PCS 7
Page 12: ...Table of contents SITRANS Library for PCS 7 12 Function Manual 05 2019 A5E35351976 11 ...
Page 418: ...SITRANS P 10 2 SitraPDr SITRANS Library for PCS 7 418 Function Manual 05 2019 A5E35351976 11 ...
Page 850: ...Index SITRANS Library for PCS 7 850 Function Manual 05 2019 A5E35351976 11 ...