Siemens SITRANS PCS 7, Function Manual, Page: 226 / 850

Parameter Description Type Default
SafePos Neutral position for control valve:
0 = Closed
1 = Open
2 = Stop INT 0
SafePosAux Neutral position for auxiliary
valve:
1= Open
0 = Closed
BOOL 0
SampleTime Sampling time [s] (assigned auto‐
matically)
REAL 0.1
SelFp1 Call a block saved in this param‐
eter as additional faceplate in
standard view
ANY -
SelFp2 Call a block saved in this param‐
eter as additional faceplate in pre‐
view
ANY -
SimLiOp Activation/deactivation of the sim‐
ulation by:
0 = Operator
1 = Interconnection or SFC
STRUCT
Value: BOOL
ST: BYTE -
0
16#80
SimOnLi 1 = Simulation via interconnec‐
tion or SFC (controlled by Sim‐
LiOp = 1)
STRUCT
Value: BOOL
ST: BYTE -
0
16#80
SimOn* 1 = Simulation on BOOL 0
SimRbk* Position feedback used for Si‐
mOn = 1
REAL 0.0
SimCnDev Control Deviation value used for
SimOn = 1
REAL 0.0
SimCnDevLi Linkable simulation value for Con‐
trol Deviation
STRUCT
Value: BOOL
ST: BYTE -
0
16#80
SimCurrentTemp Current Temeprature value used
for SimOn = 1
REAL 0.0
SimCurrentTempLi Linkable simulation value for Cur‐
rent Temeprature
STRUCT
Value: BOOL
ST: BYTE -
0
16#80
SimRbkLi Position feedback used for Si‐
mOnLi.Value = 1 (SimLiOp.Value
=1).
STRUCT
Value: REAL
ST: BYTE -
0.0
16#80
SlotHart Number of the slot (channel) with‐
in the AO modules connected to
the Sipart in the HW Config
INT 0
StepNo Batch step number DWORD 16#00000000
Tim* Monitoring time for setting of
"Controller error" fault message
REAL 0.0
SIPART PS2 HART
7.1 SipPS2HA
SITRANS Library for PCS 7
226
Function Manual, 05/2019, A5E35351976-11