(17) Display area for block states
This area provides additional information on the operating state of the block:
● “Error End position”
● "Control error"
● "Invalid signal"
● "Changeover error"
Additional information on these errors is available in the sections "Monitoring the feedbacks,
Error handling", (subsection "Invalid input signals" and "Mode switchover error") in the APL
Online Help.
(18) Display area for block states
This area provides additional information on the operating state of the block:
● "Forced open" (OpenForce)
● "Forced close" (CloseForce)
● "Forced tracking" (MV_ForOn)
● "Tracking" (MV_TrkOn)
● "Request 0/1": A reset to "automatic mode" is expected.
For more information, refer to the "Forcing operating states" section in the APL Online Help.
(19) Display area for state of the Sipart PS2
This area provides additional information on the Sipart PS2 module:
● "Local operation"
(20) Display area for state of the Sipart PS2
Display area for block states
● "Fail-safe position"
(21) Display area for state of the binary input BE2
This area provides additional information on the binary input BE2 according to the configuration
of Bin2:
● "Message Bin2"
● "Travel to end value"
● "Travel to start value"
● "Movement blocked"
● "PST" (Partial-Stroke-Test)
SIPART PS2 HART
7.1 SipPS2HA
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
239
Summary of Contents for SITRANS PCS 7
Page 12: ...Table of contents SITRANS Library for PCS 7 12 Function Manual 05 2019 A5E35351976 11 ...
Page 418: ...SITRANS P 10 2 SitraPDr SITRANS Library for PCS 7 418 Function Manual 05 2019 A5E35351976 11 ...
Page 850: ...Index SITRANS Library for PCS 7 850 Function Manual 05 2019 A5E35351976 11 ...