manualshive.com logo in svg

Siemens SITRANS PCS 7, Function Manual, Page: 236 / 850

Share
Download
Siemens SITRANS PCS 7 Function Manual Download Page 236

For more information on switching over of the operating mode, refer to the "Switchover of 

operating state and operating mode" section in the APL Online Help.

(2) Opening, closing and stopping the control valve

This area shows you the default operating state for the valve. The following states can be 

shown and executed here:
● "Open"
● "Close"
● "Stop" (display only, no operation possible)
"Close"/"open" command relates to the auxiliary valve. If no auxiliary valve is required for 

controlling the control valve, the "Open" and "Close" commands affect the control valve.
If text is configured for these commands, it is displayed as status text and as button labels for 

command selection. You can find additional information on this in the "Labeling buttons and 

texts" section in the APL Online Help.
For more information on switching over of the state, refer to the "Switchover of operating state 

and operating mode" section in the APL Online Help.

(3) Displaying and switching the default manipulated variable

This area shows how to specify the manipulated variable. The manipulated variable can be 

specified as follows:
● By the application ("External", CFC/SFC)
● By the user directly in the faceplate ("Internal").
For more information on switching over of the manipulated variable specification, refer to the 

"Switchover of operating state and operating mode" section in the APL Online Help. 

(4) Resetting the block

Click "Reset" for interlocks or errors. For more information, refer to the "Resetting the block in 

case of interlocks or errors" section in the APL Online Help.

(5) High and low scale range for the manipulated variable

These values provide information on the display range for the bar graph of the manipulated 

variable. The scale range is defined on the Sipart and read by the block there.

(6) Displaying and changing the manipulated variable including signal status:

This area shows the current manipulated variable with the corresponding signal status. 
The manipulated variable can only be changed by
● Internal manipulated variable specification (MV_ExtAct = 0) and
● an open auxiliary valve (due to the dependence on the standard function "Neutral position 

for motors, valves and controllers" that is described in the APL Online Help).

SIPART PS2 HART
7.1 SipPS2HA

SITRANS Library for PCS 7

236

Function Manual, 05/2019, A5E35351976-11

Summary of Contents for SITRANS PCS 7



















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments