Siemens SITRANS PCS 7, Function Manual

Page: 733 / 850

Parameter Description Type Default
PV3Meas*
Measured value that is interconnected at the
PV3
input:
0: Out of service
4: DPD (dual point difference)
5: DPA (dual point average)
BYTE 0
SrcR1*
Source relay 1 BYTE 0
SrcR2*
Source relay 2 BYTE 0
SrcR3*
Source relay 3 BYTE 0
SrcR4*
Source relay 4 BYTE 0
SrcR5*
Source relay 5 BYTE 0
SrcR6*
Source relay 6 BYTE 0
CtrFctR1..6*
Control function relay 1..6
0: Invalid
1: Level alarm
2: Alarm low
3: Warning low
4: Warning high
5: Alarm high
6: In bounds
9: Out of bounds
12: Rate of change
15: Temperature
20: Loss of echo
16: Cable fault
22: External totalizer active
23: External flow sampler active
25: Pump control fixed duty assist
26: Pump control fixed duty backup
30: Pump control alternate auty assist
31: Pump control alternate futy backup
35: Pump control service ratio duty assist
36: Pump control service ratio duty backup
40:
PmpFIFO
: Pump control FiFo active
65: Flush valve active
66: Relay controlled by bus communication
BYTE 0
MaxVolume_PV1*
Maximum volume REAL 0
MaxVolume_PV2*
Maximum volume REAL 0
MinVolume_PV1*
Minimum volume REAL 0
MinVolume_PV2*
Minimum volume REAL 0
MaxFlow_PV1*
Maximum flow REAL 0
MaxFlow_PV2*
Maximum flow REAL 0
MinFlow_PV1*
Minimum flow REAL 0
MinFlow_PV2*
Minimum flow REAL 0
PV1OvrWr*
0:
PV1
not overwritten
1:
PV1
overwritten by DI1
2:
PV1
overwritten by DI2
BYTE 0
PV2OvrWr*
0:
PV2
not overwritten
1:
PV2
overwritten by DI1
2:
PV2
overwritten by DI2
BYTE 0
MultiRanger 200
16.1 MR200
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
733