Siemens SINAMICS G120P, Operating Instructions Manual

Page: 245 / 496

Operation
6.8 Communication via RS485
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
245
Code numbers of the object types supported in BACnet
Object type Code number for BACnet
object type
Object type Code number for BACnet
object type
Device Object 8 Analog Input Object 0
Binary Input Object 3 Analog Output Object 1
Binary Output Object 4 Analog Value Object 2
Binary Value Object 5 Multi-State Input Object 13
Object properties of the "Device" object type
•
Object_Identifier
•
Application_Software_Version
•
APDU_Timeout
•
Object_Name
•
Protocol_Version
•
Number_Of_APDU_Retries
• Object_Type • Protocol_Revision • Max Master
• System_Status • Protocol_Services_Supported • Max Info Frames
•
Vendor_Name
•
Protocol_Object_Types_Supported
•
Device Address Binding
•
Vendor_Identifier
•
Object_List
•
Database Revision
• Model_Name • Max_APDU_Length_Accepted
1)
• Firmware_Revision • Segmentation_Supported
2)
1)
Length = 480
2)
Not supported
Object properties of other object types
Object property Object type
Binary Input Binary
Output
Binary Value Analog Input Analog
Output
Analog
Value
Multi-State
Input
Object_Identifier X X X X X X X
Object_Name X X X X X X X
Object_Type X X X X X X X
Present_Value X X X X X X X
Description X X X X X X X
Status_Flags X X X X X X X
Event_State X X X X X X X
Out_Of_Service X X X X X X X
Units X X X
Priority_Array X X* X X*
Relinquish_Default X X* X* X
Polarity X X
Active_Text X X X