Siemens SINAMICS G120P, Operating Instructions Manual

Page: 206 / 496

Operation
6.6 PROFIenergy profile for PROFINET
Inverter cabinet units
206
Operating Instructions, 12/2014, A5E32923362A
Transition to the energy-saving mode from the PROFIdrive operating state (S4)
If you set p5611.2 = 1, you permit the transition to the energy-saving mode from the
PROFIdrive operating state (S4).
You can select the following:
● p5611.1 = 1
With the transition to the energy-saving mode, the inverter issues an OFF1 command and
enters the start-inhibit state (S1).
● p5611.1 = 0
You can use p5614 to interconnect a signal source that switches the inverter off and
places it in the start-inhibit state (S1).
PROFIenergy measured values
PROFIenergy SINAMICS source parameters Value range
Measured value Accuracy Unit
ID Name Domain Class Number Name
34 Active power 1 12 W r0032 Active power smoothed r2004
166 Power factor 1 12 1 r0038 Smoothed power factor 0 … 1
200 Active energy import 2 11 Wh r0039[1] Energy accepted -