Siemens SINAMICS G120P, Operating Instructions Manual

Page: 32 / 496

Device overview
2.5 Type plate
Inverter cabinet units
32
Operating Instructions, 12/2014, A5E32923362A
Type
A
Type
C
Documentation (standard: English/German)
D02
Customer documentation (circuit diagram, terminal diagram, layout diagram) in DXF
format
✓ ✓
D04 Customer documentation as hard copy ✓ ✓
D14 Draft of customer documentation ✓ ✓
D58 Documentation language: English/French ✓ ✓
D60 Documentation language: English/Spanish ✓ ✓
D80 Documentation language: English/Italian ✓ ✓
D91 Documentation language: English/Chinese ✓ ✓
D94 Documentation language: English/Russian ✓ ✓
Languages (standard: English/German)
T58
Type plate data in English/French ✓ ✓
T60 Type plate data in English/Spanish ✓ ✓
T80 Type plate data in English/Italian ✓ ✓
T85 Rating plate data in English/Russian ✓ ✓
T91 Rating plate data in English/Chinese ✓ ✓
Inverter acceptance in customer's absence (not shown on the type plate)
F03
Visual acceptance ✓ ✓
F71 Function test with no motor connected ✓ ✓
F75 Function test with test bay motor (no load) ✓ ✓
F77 Insulation test ✓ ✓
F97 Customer-specific acceptance inspections (on request) ✓ ✓
Inverter acceptance without the customer being present (not shown on the type plate)
F72
Function test with no motor connected ✓ ✓
F74 Function test with test bay motor (no load) ✓ ✓
F76 Insulation test ✓ ✓
Labels
Y31
Single-line label for system identification, 40 × 80 mm ✓ ✓
Y32 Two-line label for system identification, 40 × 180 mm ✓ ✓
Y33 Four-line label for system identification, 40 × 180 mm ✓ ✓
✓ indicates that this option is available for that type.
– indicates that this option is not available for that type.