Siemens SINAMICS G120P, Operating Instructions Manual

Page: 469 / 496

Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
469
Technical specifications
11
11.1 Section content
This chapter provides information on the following:
● General and specific technical specifications for the devices.
● Information on restrictions that apply when the devices are used in unfavorable ambient
conditions (derating)
11.2 General data
Table 11- 1 General technical data
Electrical data
Line system configurations
Grounded TN/TT systems and non-grounded IT systems
Line frequency 47 ... 63 Hz
Output frequency 0 ... 100 Hz
Displacement factor cos φ 0.96
Power factor λ 0.75 ... 0.93
Converter efficiency > 98 %
Overvoltage category III according to EN 61800-5-1
Mechanical data
Degree of protection
IP20 (higher degrees of protection up to IP54 optional)
Class of protection I according to EN 61800-5-1
Touch protection EN 50274 and BGV A3 when used as intended
Cabinet system Schäfer industrial housing IS-1, doors with double-barb lock, base plates with cable entry
possibilities.
Paint finish RAL 7035 (indoor requirements)
Sound pressure level L
pA
(1 m)
• for 50 Hz line frequency: ≤ 69 dB(A)
•
for 60 Hz line frequency: ≤ 69 dB(A)
Cooling method Forced air cooling AF according to EN 60146
Compliance with standards
Standards
EN 60146-1, EN 61800-2, EN 61800-3, EN 61800-5-1, EN 60204-1, EN 60529
2)
CE mark In accordance with EMC Directive No. 2004/108/EC and Low-Voltage Directive No.
2006/95/EC and Machinery Directive No. 2006/42/EC
RI suppression In accordance with the EMC product standard for variable-speed drives EN 61800-3, "sec-
ond environment."
Application in "first environment" possible with line filters (option L00)
1)
.