manualshive.com logo in svg

Siemens FC300, Operating Instructions Manual, Page: 75 / 518

Share
Download
Siemens FC300 Operating Instructions Manual Download Page 75

6. Connect wires to terminals using wiring tool, wall mount transmitter.

PROFIBUS DP/PA

④

In + (B)

⑤

In - (A)

⑥

Out + (B)

⑦

Out - (A)

7. Tighten cable gland.

5.2.4.6

Step 3: Connecting the power supply

1. Flip open power supply terminal protection cover.
2. Remove cap and ferrule from cable gland and slide onto cable.
3. Push cable through open gland and cable path.

4. Restore ferrule and tighten cap to lightly hold cable in place.

Connecting

5.2 Connecting MASS 2100/FC300

MASS 2100 & FC300 (FCT030)

Operating Instructions, 06/2017, A5E39789040-AA

75

Summary of Contents for FC300







































































































































































































































































































































































































































































































































Reviews:

No comments