HMI menu ID Parameter
Description
Default value
[unit]
Value range
Access
level
2.2.8.3
Measurement Mode
Mass or fraction table is selected Massflow
● Massflow
● Volumeflow
Read
only
2.2.7.2
Units
Select unit for displayed fraction
volume flow rate. Unit is not ap‐
plied at communication inter‐
face.
m
3
/h
l/s, l/min, l/h, l/ d,
Ml/d, hl/s, hl/ min,
hl/h, hl/d, m
3
//s,
m
3
/min, m
3
/h, m
3
/
d, Mm
3
/d, gal/s
(US), gal/min
(US), gal/h (US),
gal/d (US), Mgal/
d, gal/s (UK), gal/
min (Uk), gal/h
(UK), gal/d (UK),
bbl-beer/s, bbl-
beer/min, bbl-
beer/h, bbl-beer/
d, kbbl/d, Mbbl/d,
bbl (US)/s, bbl
(US)/min, bbl
(US)/h, bbl (US)/
d, ft
3
/s, ft
3
/min, ft
3
/
h, ft
3
/d, Mft
3
/d, af/
min, af/h, af/d, in
3
/
s, in
3
/min, in
3
/h,
in
3
/d, yd3/s, yd
3
/
min, yd
3
/h, yd
3
/d,
bu/s, bu/min, bu/
h, bu/d, Custom
User
2.2.7.4
Fraction Name
Name of the selected fraction or
concentration of two-part mix‐
tures or solutions.
Read
Only
2.2.7.5
Fraction A
2.2.7.5.1
Fraction A Text
Enter a text to describe the Frac‐
tion A.
User
2.2.7.5.2
Upper Limit Alarm
Set upper alarm limit. Alarm is
triggered if fraction A value is
above the limit.
1)
1)
User
2.2.7.5.3
Upper Limit Warning
Set upper warning limit. Warning
is triggered if fraction A value is
above the limit.
1)
1)
User
2.2.7.5.4
Lower Limit Warning
Set lower warning limit. Warning
is triggered if fraction A value is
below the limit.
1)
1)
User
2.2.7.5.5
Lower Limit Alarm
Set lower alarm limit. Alarm is
triggered if fraction A value is be‐
low the limit.
1)
1)
User
2.2.7.5.6
Alarm Hysteresis
Enter the hysteresis to avoid un‐
wanted rapid switching.
1)
1)
User
Default settings
B.3 Standard volume flow
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
281