HMI menu ID Parameter
Description
Default value
[unit]
Value range
Access
level
2.3.1.7
Fail-safe behaviour
Select reaction of the totalizer
function in case of unreliable
process flow value.
Run
● Run
● Hold
● Memory
User
2.3.1.8
Reset
Reset totalizer 1 to zero
● Cancel
● Ok
User
2.3.1.9
Preset
Reset totalizer 1 to selected pre‐
set value
● Cancel
● Ok
User
2.3.1.10
Alarm and warning limits
2.3.1.10.11)
Upper alarm limit
Set upper alarm limit. Alarm is
triggered if totalizer 1 value is
above the limit.
[kg]
User
2.3.1.10.21)
Upper warning limit
Set upper warning limit. Waning
is triggered if totalizer 1 value is
above the limit.
[kg]
User
2.3.1.10.31)
Lower warning limit
Set lower warning limit. Warning
is triggered if totalizer 1 value is
above the limit.
[kg]
User
2.3.1.10.4 1)
Lower alarm limit
Set lower alarm limit. Alarm is
triggered if totalizer 1 value is
above the limit.
[kg]
User
2.3.1.10.5 1)
Hysteresis
Sets the hysteresis for alarm
and warning limits. The hystere‐
sis is the distance between the
limits for activation and deactiva‐
tion of an alarm/warning.
0
[kg]
User
2.3.1.10.12)
Upper alarm limit
Set upper alarm limit. Alarm is
triggered if totalizer 1 value is
above the limit.
[m3]
User
2.3.1.10.22)
Upper warning limit
Set upper warning limit. Warning
is triggered if totalizer 1 value is
above the limit.
[m3]
User
2.3.1.10.32)
Lower warning limit
Set lower warning limit. Warning
is triggered if totalizer 1 value is
above the limit.
[m3]
User
2.3.1.10.4 2)
Lower alarm limit
Set lower alarm limit. Alarm is
triggered if totalizer 1 value is
above the limit.
[m3]
User
2.3.1.10.5 2)
Hysteresis
Enter the hysteresis to avoid un‐
wanted rapid switching.
0
[m3]
User
2.3.1.10.3)
Upper alarm limit
Set upper alarm limit. Alarm is
triggered if totalizer 1 value is
above the limit.
[normal m3]
User
2.3.1.10.23)
Upper warning limit
Set upper warning limit. Warning
is triggered if totalizer 1 value is
above the limit.
[normal m3]
User
2.3.1.10.33)
Lower warning limit
Set lower warning limit. Warning
is triggered if totalizer 1 value is
above the limit.
[normal m3]
User
Default settings
B.4 Totalizer
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
285