HMI menu ID Parameter
Description
Default value
[unit]
Value range
Access
level
2.3.1.10.4 3)
Lower alarm limit
Set lower alarm limit. Alarm is
triggered if totalizer 1 value is
above the limit.
[normal m3]
User
2.3.1.10.5 3)
Hysteresis
Sets the hysteresis for alarm
and warning limits. The hystere‐
sis is the distance between the
limits for activation and deactiva‐
tion of an alarm/warning.
0
[normal m3]
User
1)
Process Value is set to Mass flow
2)
Process Value is set to Volume flow
3)
Process Value is set to Standard volume flow
Table B-8
Totalizer 2
HMI menu ID Parameter
Description
Default value
[unit]
Value range
Access
level
2.3.2.1
Process value
Select process value for totaliza‐
tion.
Mass flow
● Mass flow
● Volume flow
● Standard
volume flow
● Fraction A
● Fraction B
User
2.3.2.2
Unit 1)
Select unitss for triggered total‐
izer 2. Units are not applied at
communication interface.
Kg
Kg, t, STon, T, oz,
lb, Custom
User
2.3.2.2
Unit 2)
Select unitss for triggered total‐
izer 2. Units are not applied at
communication interface.
L
L, hl, m³, gal,
i.ga.,bbl31.5,
bbl31, bbl42, in³,
ft³, yd³, bush, Cus‐
tom
User
2.3.2.2
Unit 3)
Select units for triggered totaliz‐
er 2. Units are not applied at
communication interface.
SL
Nl, Nm³, SI, Sft³,
Sm³, Custom
User
2.3.2.3
Custom units
Define a name for the custom
units. The custom units can then
be selected in the units list.
Sensor Depend‐
ent
User
2.3.2.4
Custom conversion fac‐
tor
Define a mass factor for the cus‐
tom units. The factor is based on
SI mass units kg
1)
1)
User
Default settings
B.4 Totalizer
MASS 2100 & FC300 (FCT030)
286
Operating Instructions, 06/2017, A5E39789040-AA