manualshive.com logo in svg

Siemens FC300, Operating Instructions Manual, Page: 170 / 518

Share
Download
Siemens FC300 Operating Instructions Manual Download Page 170

WARNING

Humid environment
Risk of electric shock.
● Avoid working on the device when it is energized.
● If working on an energized device is necessary, ensure that the environment is dry.
● Make sure when carrying out cleaning and maintenance work that no moisture penetrates 

the inside of the device.

CAUTION

Hot parts in the device
Temperatures that can burn unprotected skin may be present for some time after the device 

has been switched off.
● Observe the waiting time specified in Technical data (Page 215) or on the device before 

starting with maintenance work.

WARNING

Enclosure open
Risk of explosion in hazardous areas as a result of hot components and/or charged capacitors 

inside the device. 
To open the device in a hazardous area:
1. Isolate the device from power.
2. Observe the wait time specified in Technical data (Page 215) or on the warning sign before 

opening the device.

3. Visually inspect sensor inlet and outlet.
Exception: Devices exclusively having the type of protection "Intrinsic safety Ex i" may be 

opened in an energized state in hazardous areas.

CAUTION

Hazardous voltage at open device
Risk of electric shock when the enclosure is opened or enclosure parts are removed.
● Before you open the enclosure or remove enclosure parts, de-energize the device.
● If maintenance measures in an energized state are necessary, observe the particular 

precautionary measures. Have maintenance work carried out by qualified personnel.

Service and maintenance
9.4 Maintenance and repair work 

MASS 2100 & FC300 (FCT030)

170

Operating Instructions, 06/2017, A5E39789040-AA

Summary of Contents for FC300







































































































































































































































































































































































































































































































































Reviews:

No comments