manualshive.com logo in svg

Siemens FC300, Operating Instructions Manual, Page: 112 / 518

Share
Download
Siemens FC300 Operating Instructions Manual Download Page 112

Note
Recalibration of the keypad
When the lid is mounted, all keys are recalibrated (approximately 40 seconds). During 

recalibration the LED is on and the keys cannot be operated.
If one of the keys is pressed for more than 10 seconds, this key is recalibrated (duration less 

than 10 seconds). Release the key for further operation.

Note
HMI timeout
If no key is pressed for 10 minutes, the display switches to show operation view.

Note
Operation does not require opening of the device. This means that the high degree of protection 

of IP67 and safety in hazardous areas are guaranteed at all times.

Note
Motor fuel dispensers
The Local User Interface is not suitable as an indication device for motor fuel dispensers.

Note
Display backlight
The display backlight goes off automatically 30 seconds after the last keypress.

Operating MASS 2100/FC300 with FCT030
7.2 Operating instructions

MASS 2100 & FC300 (FCT030)

112

Operating Instructions, 06/2017, A5E39789040-AA

Summary of Contents for FC300







































































































































































































































































































































































































































































































































Reviews:

No comments