HMI menu ID Parameter
Description
Default value
[unit]
Value range
Access
level
2.3.2.10.4 2)
Lower alarm limit
Set lower warning limit. Alarm is
triggered if totalizer 2 value is
above the limit.
[m3]
User
2.3.2.10.5 2)
Hysteresis
Enter the hysteresis to avoid un‐
wanted rapid switching.
0
[m3]
User
2.3.2.10.3)
Upper alarm limit
Set upper alarm limit. Alarm is
triggered if totalizer 2 value is
above the limit.
[normal m3]
User
2.3.2.10.23)
Upper warning limit
Set upper warning limit. Waning
is triggered if totalizer 2 value is
above the limit.
[normal m3]
User
2.3.2.10.33)
Lower warning limit
Set lower alarm limit. Warning is
triggered if totalizer 2 value is
above the limit.
[normal m3]
User
2.3.2.10.4 3)
Lower alarm limit
Set lower warning limit. Alarm is
triggered if totalizer 2 value is
above the limit.
[normal m3]
User
2.3.2.10.5 3)
Hysteresis
Enter the hysteresis to avoid un‐
wanted rapid switching.
0
[normal m3]
User
1)
Process Value is set to Mass flow
2)
Process Value is set to Volume flow
3)
Process Value is set to Standard volume flow
Table B-9
totalizer 3
HMI menu ID Parameter
Description
Default value
[unit]
Value range
Access
level
2.3.3.1
Process value
Select process value for totaliza‐
tion.
Mass flow
● Mass flow
● Volume flow
● Standard
volume flow
● Fraction A
● Fraction B
User
2.3.3.2
Unit 1)
Select units for triggered totaliz‐
er 3. Units are not applied at
communication interface.
kg
Kg, t, STon, T, oz,
lb, Custom
User
2.3.3.2
Unit 2)
Select units for triggered totaliz‐
er 3. Units are not applied at
communication interface.
L
L, hl, m³, gal,
i.ga.,bbl31.5,
bbl31, bbl42, in³,
ft³, yd³, bush, Cus‐
tom
User
2.3.3.2
Unit 3)
Select units for triggered totaliz‐
er 3. Units are not applied at
communication interface.
NL
Nl, Nm³, SI, Sft³,
Sm³, Custom
User
2.3.3.3
Custom units
Define a name for the custom
units. The custom units can then
be selected in the units list.
User
Default settings
B.4 Totalizer
MASS 2100 & FC300 (FCT030)
288
Operating Instructions, 06/2017, A5E39789040-AA