manualshive.com logo in svg

Siemens FC300, Operating Instructions Manual, Page: 243 / 518

Share
Download
Siemens FC300 Operating Instructions Manual Download Page 243

Highly flammable
R phrases: for example: 11, 15, 17 (10, 30)

Oxidizing 
R phrases: for example: 7, 8, 9 (14, 15, 19)

Flammable
R phrases: for example11 (10)

 

Group 2 fluids
All fluids not belonging to Group 1.
Also applies to fluids which are for example dangerous to the environment, corrosive, 

dangerous to health, irritant or carcinogenic (if not highly toxic).

Conformity assessment

Flowmeters of categories I to III comply with the safety requirements of the directive. They are 

affixed with the CE mark and an EC declaration of conformity is provided.
The flowmeters are subjected to the conformity assessment procedure - Module H.
Flowmeters according to Article 4 Paragraph 3 are designed and manufactured in accordance 

with sound engineering practice in Denmark. PED conformity reference is not affixed to the 

CE mark.

Technical data

11.12 PED

MASS 2100 & FC300 (FCT030)

Operating Instructions, 06/2017, A5E39789040-AA

243

Summary of Contents for FC300







































































































































































































































































































































































































































































































































Reviews:

No comments