Siemens FC300 Operating Instructions Manual Download Page 110

Page: 110 / 518

Dosing Mode

Select the dosing mode to control the valve(s) on the output

Dosing options

Setup instructions for the selected dosing mode

4-6

Configure Output

Configure the output to control the valves

Process Value

Select the process value

8-15

Configure recipe

Configure the recipe (valve control and fault handling)

Active Recipe

Select a dosing recipe

*: Set Operation Mode to Status Mode and set Status Mode to control Primary Valve or

Secondary Valve.
**: Set Status Mode to Primary Valve or Secondary Valve.
***: Set Operation Mode to Dosing Control.
For dosing setup, see Valve control configuration (Page 157).

6.4

Commissioning with PDM

For commissioning with SIMATIC PDM, see separate function manual for MODBUS, HART

or PROFIBUS.

6.4.1

Operating via SIMATIC PDM

SIMATIC PDM is a software package used to commission and maintain process devices.

Summary of Contents for FC300







































































































































































































































































































































































































































































































































Search results

Summary of Contents for FC300

Reviews:

Siemens FC300, Operating Instructions Manual, Page: 110 / 518

Search results

Summary of Contents for FC300

Reviews: