wire connection can be made via M12 plug and socket or cable gland/conduit entry for cable
termination.
Sensor overview
①
Earthing terminal
②
Sensor enclosure
③
Plug and threaded port for e.g. pressure guard
Figure 3-3
Overview, remote and compact configuration
Transmitter design
The transmitter reads the primary values from the sensor and calculates derived values. It
provides up to four configurable I/Os. On channel 1, HART communication, PROFIBUS DP,
PROFIBUS PA or Modbus RTU RS485 is possible. On channel 2,3,4 each I/O can be
individually configured. A local display (human machine interface - HMI) is available, which
consists of a display and four buttons for user interaction. The transmitter adds functionalities
such as Standard volume flow, fractions, totalizers, dosing, access control, diagnostics,
configuration and logging.
The transmitter has a modular design with discrete, replaceable electronic modules and
connection boards to maintain separation between functions and facilitate field service. All
modules are fully traceable and their provenance is included in the transmitter setup.
Description
3.3 Design
MASS 2100 & FC300 (FCT030)
30
Operating Instructions, 06/2017, A5E39789040-AA