Siemens FC300 Operating Instructions Manual Download Page 64 | Manualshive

Page: 64 / 518

Siemens FC300 Operating Instructions Manual Download Page 64

WARNING

Installation in hazardous areas
When making electrical connections, observe the national statutes and provisions for

hazardous areas valid for the particular country.
● Operational safety regulations
● Directive for the installation of electrical systems in hazardous areas DIN EN 60079-14

5.2.3

Connecting the multiple plug to the sensor

When connecting/disconnecting the pipes, the cable must be mechanically connected in order

to prevent the liquid from penetrating into the electrical multiple plug on the sensor.
Mount the multiple plug and tighten the glands for optimum sealing.

5.2.4

Transmitter power supply and I/Os connection

5.2.4.1

Step 1: Connecting the DSL and the transmitter

The following only applies to remote configurations.

Wiring DSL (sensor) and transmitter (M12)

The DSL is provided with a preformed cable terminated with M12 style stainless steel weather-

proof plugs.

Connecting
5.2 Connecting MASS 2100/FC300

MASS 2100 & FC300 (FCT030)

64

Operating Instructions, 06/2017, A5E39789040-AA

«
...
62
63
64
65
66
...
»

Summary of Contents for FC300







































































































































































































































































































































































































































































































































Reviews:

No comments