manualshive.com logo in svg

Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 505 / 576

Share
Download
Sharp MX 5500N - Color Laser - Copier User Manual Download Page 505

7

INTERIOR

(16) Paper pass unit*

This transfers output to the finisher or saddle stitch 
finisher.

(17) Toner cartridges

These contain toner for printing. When the toner runs out 
in a cartridge, the cartridge of the color that ran out must 
be replaced.

☞

REPLACING THE TONER CARTRIDGES

 (page 71)

(18) Fusing unit

Heat is applied here to fuse the transferred image onto 
the paper.

(19) Transfer belt

During full color printing, the toner images of each of the 
four colors on each of the photoconductive drums are 
combined together on the transfer belt. During black and 
white printing, only the black toner image is transferred 
onto the transfer belt.

(20) Right side cover

Open this cover to operate the fusing unit pressure 
adjusting lever and to remove a misfeed.

☞

Fusing unit pressure adjusting levers

 (page 43)

(21) Paper reversing section cover

This is used when 2-sided printing is performed. Open 
this cover to remove a paper misfeed.

(22) Bypass tray

Use this tray to feed paper manually.
When loading paper larger than 8-1/2" x 11"R or A4R, be 
sure to pull out the bypass tray extension.

☞

LOADING PAPER IN THE BYPASS TRAY

 (page 38)

(23) Main power switch

This is used to power on the machine.
When using the fax or Internet fax functions, keep this 
switch in the "on" position.

☞

TURNING THE POWER ON AND OFF

 (page 16)

(24) Waste toner box

This collects excess toner that remains after printing.

☞

REPLACING THE WASTE TONER BOX

 (page 74)

(25) Waste toner box compartment cover

Open this to remove a paper misfeed from trays 1 to 4, or 
to replace the waste toner box.

(26) Right side cover release lever

To remove a paper misfeed, pull and hold this lever up to 
open the right side cover.

* Peripheral device.

(22)

(21)

(19) (20)

(18)

(16)

(17)

(25)

(26)

(24)

(23)

When a finisher / 
saddle stitch finisher is 
not installed

Caution

The fusing unit is hot. Take care not to burn yourself 
when removing a paper misfeed.

Do not touch or damage the transfer belt. This may 
cause a defective image.

Your service technician will collect the waste toner 
box.

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments