manualshive.com logo in svg

Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 554 / 576

Share
Download
Sharp MX 5500N - Color Laser - Copier User Manual Download Page 554

56

Removing a staple jam from the saddle stitch unit

To remove a staple jam from the saddle stitch unit, remove the staple cartridge and then follow the steps below. To 
remove the staple cartridge from the saddle stitch unit or replace the saddle stitch unit, see "

Replacing the staple 

cartridges in the saddle stitch unit

" (page 53).

1

Remove the staple cartridge from the 
staple unit.

2

Press (A) down and pull up knob (B).

3

Remove the jammed staples and then 
return knob (B) to its original position.

4

Replace the staple cartridge.

Make a test print or copy using the saddle stitch function to verify that stapling takes place correctly.

(A)

(B)

(B)

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments