manualshive.com logo in svg

Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 67 / 576

Share
Download
Sharp MX 5500N - Color Laser - Copier User Manual Download Page 67

66

Other Settings

Copy Exposure Adjustment

This is used to adjust the exposure level when [Auto] is 
used for the copy exposure.

Color

Use this to set the copy exposure level in color mode for the 
document glass and for the automatic document feeder.

Black & White

Use this to set the copy exposure level in black & white 
mode for the document glass and for the automatic 
document feeder.

Rotation Copy Setting

When the original and paper are placed in different 
orientations, this function automatically rotates the image 
90 degrees to enable correct copying on the paper.

Add or Change Extra Preset Ratios

Two enlargement preset ratios (101% to 400%) and two 
reduction preset ratios (25% to 99%) can be added. An 
added preset ratio can also be changed.

Setting a Maximum Number of Copies

This is used to set the maximum number that can be 
entered for the number of copies (number of continuous 
copies). Any number from 1 to 999 can be specified.

Initial Margin Shift Setting

This is used to set the default margin shift amount. 
Specify a value from 0" (0 mm) to 1" (20 mm) in 
increments of 

1/8" (

1 mm) for both the front and reverse 

sides.

Erase Width Adjustment

This is used to set the default erase width for erase 
copy. Specify a value from 0" (0 mm) to 1" (20 mm) in 
increments of 1/8" (1 mm) for both edge erase and 
center erase.

Card Shot Settings

This is used to set the default original size for the card 
shot function.
Both the X (horizontal) and Y (vertical) dimensions of the 
original can be set from 1" (25 mm) to 8-1/2" (210 mm) in 
increments of 1/8" (1 mm).

Fit to Page

Enable this setting to have the [Fit to Page] key always 
appear in the card shot screen.

Automatic Saddle Stitch

(When a saddle stitch finisher is installed.)

This is used to have saddle stitch stapling take place 
automatically when the pamphlet copy function is used.

Initial Tab Copy Setting

This is used to set the default image shift width (tab 
width) for tab copying.
The default width can be set from 0" (0 mm) to 5/8" 
(20 mm) in increments of 1/8" (1 mm).

• Image rotation can only take place when automatic 

paper selection or automatic ratio selection is enabled.

• The Rotation Copy setting must be enabled when 

copying an 5-1/2" x 8-1/2" (A5) size original on 
5-1/2" x 8-1/2"R (A5R) paper.

Preset ratios other than added preset ratios cannot be 
changed.

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments