manualshive.com logo in svg

Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 545 / 576

Share
Download
Sharp MX 5500N - Color Laser - Copier User Manual Download Page 545

47

Placing a thick book

When scanning a thick book or other thick original, follow the steps below to press the book down.

(1) Push up the far side of the automatic 

document feeder.

The hinges supporting the automatic document feeder 
will release and the rear side of the automatic document 
feeder will rise.

(2) Slowly close the automatic document 

feeder.

(2)

(1)

Caution

•

Close the automatic document feeder slowly. Abruptly closing the automatic document feeder may damage it.

•

Take care that your fingers are not pinched when closing the automatic document feeder.

The automatic document feeder cannot be closed correctly in this state. To return the automatic document feeder to its 
normal state, open it completely and then close it.

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments