manualshive.com logo in svg

Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 264 / 576

Share
Download
Sharp MX 5500N - Color Laser - Copier User Manual Download Page 264

107

CHECKING THE INTERNET FAX ACTIVITY 
LOG (Image Sending Activity Report)

You can have the machine print a log of recent image sending activity (date, name of other party, time required, result, 
etc.). The Image Sending Activity Report contains useful information such as the types of errors that occurred.
The most recent 199 transactions are included in the report.
You can have the machine print the Image Sending Activity Report each time the number of transactions reaches 200, 
or at a specified time (once a day only).

INFORMATION APPEARING IN THE RESULT COLUMN

Error types and other information are printed in the result column of transaction and activity reports. When a transaction 
report or activity report is printed, check the result of the transaction in the result column and take action as needed.

Examples of messages that are printed in the result column

The contents of the Image Sending Activity Report are erased when the report is printed, and thus it cannot be reprinted.

System Settings (Administrator): Activity Report Print Select Setting

This is used to set the conditions for printing activity reports. The factory default setting is not to print.
The Image Sending Activity Report can be set to print each time the number of transactions reaches 200, or at a specified 
time (once a day only).

Message

Explanation

OK

The transaction was completed normally.

OK REPORT

A receive report was requested for a transmission, the transmission was completed normally, and 
the receive report was received from the destination.

CANCEL

A transmission was stopped while in progress, or a reserved transmission job was canceled.

MEM. FULL

The memory became full during reception.

REJECTED

An Internet fax was sent from a party that is blocked.

NG REPORT

A receive report was requested for a transmission, however, the transmission did not take place 
correctly and a transmission failed report was received.

NO REPORT

A receive report was requested for a transmission, however, a report was not received within the 
timeout time.

NG LIMIT

Transmission was not possible because the file size exceeded the machine's file size limit setting.

RECEIVED

An e-mail was received, however, the attached file was not a TIFF-F file or there was no attached 
file, and thus printing was not possible.

FAIL xx (xxxx)

The transaction failed due to a communication error.
First 2 digits of communication error number: Error code from 00 to 99.
Last 4 digits of communication error number: Code for use by service technicians.

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments