Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 369 / 576

Share

Page: 369 / 576

Sharp MX 5500N - Color Laser - Copier User Manual Download Page 369

18

3

Set the number of copies (number of
sets) with the numeric keys.

• Up to 999 copies (sets) can be set.

• A single copy can be made even if "0" appears for the number of copies.

If an incorrect number of copies is set...

Press the [CLEAR] key (

) and then enter the correct number.

4

Press the [COLOR START] key (

)

or the [BLACK & WHITE START] key
(

).

Normally copying will start.
Depending on the copy settings (2-sided copying, etc.), copying
may not begin until all originals have been scanned. In this
case, go to the next step.

Even if a color mode is selected, copying will take place in black and white if the [BLACK & WHITE START] key (

)

is pressed.

5

Remove the original and place the next
original, and then press the [COLOR
START] key (

) or the [BLACK &

WHITE START] key (

).

Repeat this step until all originals have been scanned.
For the second original and following originals, use the same
[START] key as you did for the first original.

6

Touch the [Read-End] key.

To cancel scanning of the original and copying...

Press the [STOP] key (

).

7

Plain

8½x11

Special

Modes

2-Sided

Copy

or

or

Read-End

Place

next

original.

Press

[

Start

]

.

Wh

en

finis

h

ed

,

press

[

Read-End

]

.

«
...
367
368
369
370
371
...
»

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments