manualshive.com logo in svg

Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 534 / 576

Share
Download
Sharp MX 5500N - Color Laser - Copier User Manual Download Page 534

36

CHANGING THE PAPER SIZE (MX-LCX3)

To change the paper size of the large capacity tray (MX-LCX3), follow the procedure below.
This procedure only explains how to change the paper size. For the procedures for opening/closing the tray and loading 
paper, see "

LOADING PAPER (MX-LCX3)

" (page 34).

1

Loosen the paper guide screw.

2

Slide the plate of the paper guide.

Slide the plate until the red line appears at the center of the size 
window of the plate.

3

Adjust the paper guide to the paper size 
that will be used.

Slide the paper guide forward or backward until the size mark 
of the paper to be used (

or

) appears in the size window of 

the plate.

4

Secure the paper guide.

(1) Slide the plate of the paper guide.

Slide the plate until the paper size to be used appears in 
the size window of the plate.

(2) Tighten the paper guide screw.

5

Repeat steps 1 through 4 to adjust the 
far paper guide to the paper size to be 
used.

Be sure to adjust the far guide to the same paper size as the 
near guide.

Adjusting only one paper guide may result in skewed feeding or misfeeds.

Plate

(1)

(2)

11

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments