manualshive.com logo in svg

Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 259 / 576

Share
Download
Sharp MX 5500N - Color Laser - Copier User Manual Download Page 259

102

• Completed job

Display

Status

"Send OK"

Transmission was completed.

"In Memory"

An Internet fax has been received 
but has not yet been printed.

"Printed"

A received Internet fax has been 
printed.

"Forward OK"

A received Internet fax has been 
forwarded.

"Holding"

Received Internet fax held by print 
hold.

"Stopped"

The job was stopped.

"Number of 
successful 
transmission 
destinations/
Total 
destinations 
OK"

A broadcast transmission has been 
completed.
If transmission to 3 destinations 
was successful out of a total of 5, 
"003/005 OK" will appear.

"No 
Response"

An error occurred because there 
was no response from the 
destination.

"OK Report"

A receive report was requested for 
a transmission, the transmission 
was completed normally, and the 
receive report was received from 
the destination.

"NG Report"

A receive report was requested for 
a transmission, however, the 
transmission did not take place 
correctly and a transmission failed 
report was received.

"No Report"

An e-mail was received without an 
attached file and thus printing was 
not possible.

"Received"

An e-mail was received, however, 
the attached file was not a TIFF-F 
file or there was no attached file, 
and thus printing was not possible.

"Rejected"

An Internet fax was sent from a 
party that is blocked.

"NGxxxxxx"

Transmission/reception was not 
successful because a 
communication error occurred (a 
6-digit error code appears in 
xxxxxx.)

"Error"

An error occurred while the job was 
being executed.

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments