Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 107 / 576

Share

Page: 107 / 576

Sharp MX 5500N - Color Laser - Copier User Manual Download Page 107

106

The following settings are for regular polling memory
using the Public Box.

Set Fax Polling Security

When the memory polling function is used, this setting
determines whether any machine will be allowed to poll
your machine, or only machines that have been stored in
your machine.

Add New

When the Polling Security Setting is enabled, use this
setting to store (or delete) the fax numbers of the
machines that are allowed to poll your machine. The
stored fax numbers are called passcode numbers. Up to
10 passcode numbers can be stored (maximum of 20
digits each).

Passcode Number Key List

This shows a list of the stored passcode numbers. A
number can be selected to delete it.

Fax Polling Security

Note that these settings do not apply to F-code polling
memory.

«
...
105
106
107
108
109
...
»

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments