Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 231 / 576

Share

Page: 231 / 576

Sharp MX 5500N - Color Laser - Copier User Manual Download Page 231

74

ERASING PERIPHERAL SHADOWS ON THE
IMAGE (Erase)

The erase function is used to erase shadows on images produced when scanning thick originals or books. (This function
erases the parts of the image where shadows tend to form. The function does not detect shadows and erase only the
shadows.)

Scanning a thick book

Erase modes

Shadows appear here

Not using the erase

function

Using the erase

function

Shadows appear in the
image.

No shadows appear.

• Shadows at the edges of the original can also be erased when the automatic document feeder is used.

• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.

1

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

2

Select the special modes.

(1) Touch the tab of the mode that you wish to use.

(2) Touch the [Special Modes] key.

(3) Touch the [Erase] key.

☞

Edge Erase

Center Erase

Edge + Center Erase

«
...
229
230
231
232
233
...
»

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments