Sharp MX 5500N - Color Laser - Copier User Manual Download Page 530

Page: 530 / 576

Loading transparency film

When loading transparency film, load the film in the vertical orientation with the rounded corner at the top right.

Pull out the tray and attach the guide.

Slide the guide plate to the position of the bottom edge of the
tab paper and attach the guide so that it covers the guide plate.

Insert the tab paper into the tray.

Place the tab paper with the print side face up so that the tab is
to the left.

[Example]

Make sure that the positions of the tabs correspond with the originals as shown below.

Gently push the tray in and set the paper
type to tab paper.

Change the paper type setting to tab paper as explained in
"Paper Tray Settings" in the System Settings Guide.

ABC

DEF

GHI

JKL

Front

side

1st sheet

4th sheet

2nd sheet

3rd sheet

2nd sheet 1st sheet

4th sheet

Bottom

Top

Originals

Tab Paper

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 530 / 576

Search results

Summary of Contents for MX 5500N - Color Laser - Copier

Reviews: