manualshive.com logo in svg

Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 62 / 576

Share
Download
Sharp MX 5500N - Color Laser - Copier User Manual Download Page 62

61

Device Control

These settings control devices installed on the machine. Touch the [Device Control] key to configure the settings.

Other Settings

Original Feeding Mode

The following original feeding modes can be set to 
operate by default in copy, Scan to HDD, and image 
send modes. When a mode is frequently used, this 
saves you from having to select the mode in the special 
modes each time you need to use it.

• Mixed Size Original (Same Width/Different Width)
• Slow Scan Mode

Saddle Stitch Position Adjust

(When a saddle stitch finisher is installed.)

When a saddle stitch finisher is installed, this setting is 
used to adjust the stapling position (folding position) of 
the pamphlet staple function.
The value can be adjusted in increments of 0.25 mm 
within a range of ±2.0 mm from the home position of 
each paper size.

Auto Paper Selection Setting

The paper types* that the Auto Paper Selection function will 
select can be specified. Select one of the following settings:

• Plain Paper
• Plain and Recycle Paper
• Recycle Paper

The Auto Paper Selection function will not select any 
paper types other than the paper types specified with 
this setting.
* The paper type set for each paper tray using "

Paper 

Tray Settings

" (page 16) in the system settings 

(general).

Tandem Connection Setting

When two machines are used as network printers using 
TCP/IP protocol, use this setting to configure the port 
number and IP address of the machine used as the 
tandem slave machine.

Disabling of Master Machine Mode

To prohibit tandem transmission, enable this setting. 
(There is normally no need to enable this setting.)

Disabling of Slave Machine Mode

To prohibit tandem reception, enable this setting. (There 
is normally no need to enable this setting.)

Detect Standard in Auto Color 
Mode

When the color mode is set to auto in copy mode, the 
discrimination point for detecting whether originals are 
color or black and white can be set to one of 5 levels. To 
make it easier to detect a black and white original, adjust 
the setting toward [Black & White]. To make it easier to 
detect a color original, adjust the setting toward [Color].

Auto Switching of Finisher Trays

If the number of sheets on the upper finisher tray 
reaches the sheet limit, output will automatically switch 
to the lower tray.

1

2

12

11

Position moved in 
the minus direction.

Position moved in 
the plus direction.

Max.  + 2 mm

Min. - 2 mm

Reference position

• The factory default setting for the port number is 

[50001]. Unless you experience difficulty with this 
setting, do not change the port number.

• To use the tandem function when user 

authentication is enabled, the same login name and 
password must be used on both the master 
machine and slave machine. If the same login name 
and password are not used, the page count may not 
be added to the appropriate user count or only the 
master machine may print.

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments