Sharp MX 5500N - Color Laser - Copier User Manual Download Page 239

Page: 239 / 576

WHITENING FAINT COLORS IN THE IMAGE
(Suppress Background)

This feature is used to suppress light background areas.

• This function cannot be used in Internet fax mode.

• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

Select the special modes.

(1) Touch the tab of the mode that you wish to use.

(2) Touch the [Special Modes] key.

(3) Touch the [Suppress Background] key.

Read the message that appears and then touch the [OK] key.

☞

SPECIAL MODES

(page 70)

Select the suppress background setting.

(1) Adjust the background suppression level.

Touch the [+] key to suppress only faint background.
Touch the [-] key to suppress faint to dark background.

(2) Touch the [OK] key.

The lightness level at which
suppression takes place
can be adjusted.

Level [+]

Level [-]

Scan/Special Modes

Suppress Background

Light areas of the original may be suppressed as background.

Cancel

(1)

(2)

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 239 / 576

Search results

Summary of Contents for MX 5500N - Color Laser - Copier

Reviews: