manualshive.com logo in svg

Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 246 / 576

Share
Download
Sharp MX 5500N - Color Laser - Copier User Manual Download Page 246

89

7

Touch the [Read-End] key.

• If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the 

transmission is reserved.

• The [Configure] key can be touched to change the exposure, resolution, scan size, and send size for each original 

page scanned. However, when Job Build is used in combination with "2in1" in the special modes, only the exposure 
can be changed when scanning each even-numbered page of the original pages.

If the memory becomes full during scanning, a message will appear and the transmission will be canceled.

To cancel the job build function....

Touch the [Job Build] key in the screen of step 3 so that it is not highlighted.

Read-End

Configure

Place next original.       (Pg.No.x)

Press [Start].

When finished, press [Read-End].

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments