manualshive.com logo in svg

Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 565 / 576

Share
Download
Sharp MX 5500N - Color Laser - Copier User Manual Download Page 565

67

CLEANING THE LASER UNIT

When the laser unit inside the machine becomes dirty, line patterns (colored lines) may form in the printed image.

Identifying lines (colored lines) caused by a dirty laser unit

• Colored lines always appear in the same place. (The lines are never black.)
• The colored lines are parallel to the direction of paper feeding.
• Colored lines appear not only on copies but also on print jobs from a computer. (The same lines appear on both 

copies and print jobs.)

If the above problems occur, follow the steps below to clean the laser unit.

1

Open the front cover (lower).

2

Take out the cleaning tool for the laser 
unit.

The cleaning tool is attached to the front cover (lower). 

3

Make sure that the cleaner at the tip of 
the cleaning tool is not dirty.

If the cleaner is dirty, remove the cleaner and replace it with a 
clean one. For the procedure for replacing the cleaner, see 
steps 4 through 6. If the cleaner is not dirty, go to step 7.

4

Open the inner cover and take out a 
replacement cleaner.

Replacement cleaners are stored on the inner cover.
Grasp the end of the cleaner and pull it out of the cover.

Cleaner

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments