manualshive.com logo in svg

Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 571 / 576

Share
Download
Sharp MX 5500N - Color Laser - Copier User Manual Download Page 571

73

4

Insert the new toner cartridge 
horizontally, pushing it in until it locks.

Push the cartridge firmly in until it clicks into place.

A toner cartridge of a different color cannot be installed. Be sure to install a toner cartridge of the same color.

5

Close the front cover (upper).

After the toner cartridge is replaced, the machine automatically 
enters image adjustment mode. Do not open the front cover 
(upper) during this time.

Caution

•

Do not throw a toner cartridge into a fire. Toner may fly and cause burns.

•

Store toner cartridges out of the reach of small children.

•

If a toner cartridge other than a SHARP-recommended toner cartridge is used, the machine may not attain full quality 
and performance and there is a risk of damage to the machine. Be sure to use a SHARP-recommended toner cartridge.

• Keep the used toner cartridge in a plastic bag (do not discard it). Your service technician will collect the used toner 

cartridge.

• To view the approximate amount of toner remaining, continually touch the [COPY] key during printing or when the machine 

is idle. The percentage of toner remaining will appear in the display while the key is touched. When the percentage falls to 
"25-0%", obtain a new toner cartridge and keep it ready for replacement.

• Depending on your conditions of use, the color may become faint or the image blurred.

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments