manualshive.com logo in svg

Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 243 / 576

Share
Download
Sharp MX 5500N - Color Laser - Copier User Manual Download Page 243

86

6

Turn the card over and press the 
[COLOR START] key (

) or the 

[BLACK & WHITE START] key (

) to 

scan the reverse side of the card.

Press the same [START] key that was used to scan the front 
side.

Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.

To cancel scanning...

Press the [STOP] key (

) to cancel the operation.

7

Touch the [Read-End] key.

If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure, 
resolution, scan size, and send size.

The ratio cannot be specified and "Rotation Sending Setting" cannot be selected.

To cancel Card Shot...

Touch the [Cancel] key in the screen of step 3.

or

Read-End

Configure

Place next original.       (Pg.No.x)

Press [Start].

When finished, press [Read-End].

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments