Sharp MX 5500N - Color Laser - Copier User Manual Download Page 569

Page: 569 / 576

REPLACING THE TONER CARTRIDGES

Be sure to replace the toner cartridge when the message "Change the toner cartridge." appears.

In copy mode

• If any one of the toner colors runs out (including black toner), color printing will not be possible. If Y, M, or C toner runs out

but Bk toner remains, black and white printing will still be possible.

• Be sure to install 5 toner cartridges (Y/M/C/Bk1/Bk2).

Change the toner cartridge.

( )

Ready to scan for copy.
( Change the toner cartridge.)

Ready to scan for copy.
( Toner supply is low.)

Colors that are running low or have run out of toner are indicated in (

: Yellow toner,

: Magenta toner,

: Cyan toner,

: Black toner

Replace the toner cartridges of the indicated colors.

Bk1

Bk2

If you continue to use the machine without replacing
the cartridge, the following message will appear
when the toner runs out.

When the message appears in the message display,
replace the toner cartridge for the indicated color.

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 569 / 576

Search results

Summary of Contents for MX 5500N - Color Laser - Copier

Reviews: